For the broadcasting class at AI I had the privilege to lead
a team of students to create weekly radio broadcasts. Each broadcast had a certain amount of
advertisements needed as well as new content every week based on our format
that we chose. For my team we chose
comedy radio play style piece about a team of audio engineers stuck in space,
and the adventures that they went on. We
had to create scripts for the ads and for the play weekly, and the amount of
time we had to broadcast grew each week as well. It took a couple weeks to really get everyone
on the team involved and working smoothly, but when we hit our stride we got
better and better in all aspects. It was
great to help lead the team in a creative direction, as well as watching us
grow together as a team. We spent a lot
of time each week making sure everything was top quality, and at a rapid
pace. There were many strict deadlines
which we had to meet, and as we went on it got easier and easier to meet those
requirements. Working with fellow
students and voice actors was great to add a unique flair to our piece. It was probably the most intense 6 weeks of
recording that I’ll have at the art institute but it was really important for
developing core skills and attention to detail, as well as team work aspects as
well. The use of memory locations within
Pro Tools was key for our timing and our success at filling in enough time each
week. While it was highly challenging at
times it was also a lot of fun.
Daniel Newcome's Portfolio Blog
Wednesday, March 25, 2015
Wednesday, March 18, 2015
Live Sound Recording
I got to help out some fellow audio
students record a live band over at the 702 Lounge just off the strip. It was really great getting to collaborate
with both audio and video students to make a complete, and really nice looking
project. The band we recorded was great
and had a variety of instruments from trumpet, to piano, bass, drums, and
vocals from the female lead and backup vocals from the trumpet player. They
played a mix of jazz and rock songs as well as some original tracks as well. We
got there just before the band started so we could set up. It was a fairly simple set up for the group.
We used a DAR to record all of our audio and get our levels, and we used the
Rode NT-5 pair set up on opposite sides of the stage to get the proper stereo
width of the performance. We then set up a pair of Shure SM-57’s in the back by
where we were recording to capture the proper room tone as well as audience
sounds. The thing that took the longest
was getting the levels set up properly to capture the bands sound, but once we
had that dialed in it was all about getting a good mix during the songs. My teammates and I took turns mixing songs
and getting the level correct for each song the band performed. After the concert we broke down and then it
just took a little touch up in Pro Tools to get the proper sound and to sync
the performance to the video we captured.
I’m really happy with how the project turned out.
Wednesday, March 11, 2015
Location Sound and Video Editing
This is from a group project that I helped work on several
quarters ago during my Field Sound Production class. It was a short film that a fellow classmate
had already come up with the script for.
We shot it on a location off campus and I did some boom operation while
the filming was going on. There were two
of us doing boom, one for each character to make sure they got the clearest
sound quality. Adding those tracks with
the ambience of the camera audio really added to the feel of the piece. I edited the piece for continuity, which was
difficult at times because our shooting was on a tight schedule, so piecing
together the script from only a couple takes of each line made it fairly
difficult. I mainly achieved success
through using a lot of reaction shots as opposed to just showing each person
talking back and forth. I used a couple
sound cuts, as loud sounds are made it really helps make the cut more invisible
and flow with the emotion of the piece.
Color correcting for this piece was a lot of fun, and I chose to make it
black and white to match a classic mob movie piece. It was great adding a little bit of film
grain in there as a top layer on it to give it the extra spice it needed. From there I found music beds which were
appropriate for the style of shoot we were doing. It ended up turning out much better than what
I originally thought.
Wednesday, March 4, 2015
Music Composition for Video
This is a shot of me doing some work in the studio for my
Music Scoring for video. I started out
recording live instruments such as guitar, bass, and some acoustic drums. I used some fairly basic processing using
such preamps as the Avalon 737, which adds nice analog warmth to any
recording. From there I added in some
different synthesizer patches within Pro Tools to add more layers. I used a drum machine to add some extra effects
to the drum tracks. I recorded my micro
korg as well to have more control over my synth sounds. Any other instruments such as horns I used my
micro korg as a midi controller to punch in the horn instrumentation. Getting the right reverb on each track to add
proper depth and space was very important as well. The important part was getting the music to
add the necessary emotional effect to the video. Using volume automation I was able to add the
necessary dynamic quality to add the punch I desired. Besides that it just came down to using my
vast knowledge of music theory to compose a chord progression and melody that
fit along with the piece. I layered in
some different sound effects to add to the mix in slight layers. This adds greater depth to the mix especially
when listening on a nice pair of headphones.
Getting the drums to mesh properly took a good amount of EQ-ing as well
as some light compression to get everything to resonate properly and also cut
through the mix. Rhythm helps drive the
piece forward to add the exact flair to my video piece. Adding this music to my film really helped
jump the effectiveness of the overall piece soar above and beyond.
Wednesday, February 25, 2015
Music Composition
I worked on a music composition a couple of quarters ago. Our parameters for this involved using no musical sounds whatsoever. This is known typically as Musique Concrete. It requires a lot of attention to detail and a lot of fine tuning of many sounds to get each sound to function properly within the tune. I started out by recording a handful of random knickknacks from my garage and bedroom. I used things such as glass bottles, metal water containers, jars of screws and nails, a butane torch, and even the sound of water running. On top of that we were allowed to synthesize sounds together using an old fashioned Analog Synthesizer, which works on making physical patches to get specific sounds. I recorded about an hour of different patchwork with that, and that provided me with many of my layers which I used to provide rhythm to the piece. The fun of music concrete is really manipulating the samples to change their sounds into something completely different than what they originally were. Using time expansion and compression I took many different sounds and sped them up, and others I slowed down to add more ambience to the piece. Lining the samples up with each other amongst the whole piece was very time consuming, and it took a lot of creativity to really get some magic to happen. We weren’t allowed to use any real plug-ins for this project either besides basic EQ and compression. This added another layer of difficulty in making these sounds stand out without adding any high level effects such as flanging or chorus effects. Arranging a three and a half minute piece sample by sample is definitely tedious, but the ultimate outcome of the piece was exceptional.
Wednesday, February 18, 2015
ADR and 5.1 Mixing
This is a piece I’ve been working on currently and is coming
along quite nicely. I found a short film
online that has some good dialogue in it called Expo. I gutted the entire piece after gaining
permission from the films creator and sound designed the piece from the ground
up. The most important thing for a piece
like this is the dialogue, and getting great sounding recordings that match the
lips of the characters in the film. To
achieve this you must have your voice actor loop the dialogue until it matches
the appropriate tone of the piece and the character they are portraying. Because all of the characters are in space
helmets throughout the piece I am working on, some filtering with EQ must be
done to make their voices sound like they are indeed in a helmet. For the voice of the computer I recorded my
own voice for the very short lines, and using elastic audio compressed the time
slightly so that the voice sounds more like a computer. I added some little flanging and some pretty
drastic EQ-ing to get the perfect sound.
After listening to it back I find it hard to believe that it was once my
voice. Realizing that, I knew that I had done well. Casting the right voices for the characters
is one of the hardest parts about the ADR process. So far my two actresses for this piece are
doing great, and I am excited about the final product. This will also end up being my 5.1 mixing
project which I’m very excited about.
Wednesday, February 11, 2015
Sound Design and Music Composition
This is one piece that turned out fantastic despite being given few tools to work with. The object was to sound design completely from scratch a scene from an old science fiction movie. We were not allowed to use any canned sounds and everything had to be created using only sound synthesis. I chose an old classic, War of the Monsters and found the perfect monster fight scene to recreate.
The most unique part about this piece that I enjoyed doing
the most was creating the monsters different roars that they do throughout the
battle. I did this by layering several
distorted sounds from the Vacuum plug-in in Pro Tools. I then modified them by putting them the
various pitch shifters, flangers, and to add the larger than life sound I put
them through some reverbs. The results
turned out fantastically.
Creating the ordinary sounds was actually the hardest part
of the process. Without Foley as an
option I had to get creative and create footsteps out of different low bass
drum pads. With some careful EQ work I managed to get them to sound like real
footsteps instead of what they originally were.
For the music I wanted something that would match the otherwise
cheesy puppets fighting. With that in mind I composed some fairly basic chord
structures that helped move the action forward, and they added the proper
tension to the piece.
Given all of the time I put into the project I’m definitely
proud that it turned out so well. After sound designing this piece I feel like I
can create sounds for any occasion or piece.
Subscribe to:
Posts (Atom)